Products

Both the DF1 12-station machine and the DF2 14-staton machine feature 1 1/2" diameter shafts with the DF rolls mounted on the left side standard. Center tooling can be added at the factory and/or auxiliary tooling on the opposite side. Each machine comes standard with a short parts feeder. The feeder rail can be raised or lowered for proper part alignment with the tooling.

 

• Capacity: 18-26 Gauge
• Speed: 60 feet per minute (optional up to 100 FPM)
• 12 (DF1) or 14 (DF2) stations
• 1.5" diameter (at bearing) hardened and ground spindles
• Hardened feed gauge

The model UH-412-Q comes standard with 1" Standing "S" Cleat tooling in the center position. This 12-station machine features 1 1/2" diameter shafts and a 6-way adjustable finished part straightener. There are also two (2) sets of extended shafts for auxiliary tooling.

 

• Capacity: 22 Gauge
• Speed: 60 feet per minute (optional 100 FPM)
• Standard width with 1" standing "S" cleat rolls in the center position
• Motor: 7 1/2HP 230/460/3/60/1800 RPM
• Dimensions: 130" long x 36" wide x 48" high
• Shipping Weight: 3,500 lbs.

Both the DF1 12-station machine and the DF2 14-staton machine feature 1 1/2" diameter shafts with the DF rolls mounted on the left side standard. Center tooling can be added at the factory and/or auxiliary tooling on the opposite side. Each machine comes standard with a short parts feeder. The feeder rail can be raised or lowered for proper part alignment with the tooling.

 

• Capacity: 18-26 Gauge
• Speed: 60 feet per minute (optional up to 100 FPM)
• 12 (DF1) or 14 (DF2) stations
• 1.5" diameter (at bearing) hardened and ground spindles

This machine will form the spin pocket, then crimp, bead, and coil the parts from 4" - 16" diameters in 24 Ga. and lighter galvanized steel. Machine runs at 100 fpm, had adjustable outrigger guide and movable crimp and beading dies for variable width parts. Choose from a 6" wide or 12" wide model. Add the optional front end notching station to prevent having to prenotch the blanks.

 

• Capacity: 24 Ga.
• Speed: 100 fpm
• Accommodates 2.5" - 12" wide blank
• Motor: 2HP 230/460/3/60/1800 RPM

This machine will form the spin pocket, then cripm, bead, and coil the parts from 4" - 16" diameters in 24 Ga. and lighter galvanized steel. Machine runs at 100 fpm, had adjustable outrigger guide and movable crimp and beading dies for variable width parts. Choose from a 6" wide or 12" wide model. Add the optional front end notching station to prevent having to prenotch the blanks.

 

• Capacity: 24 Ga.
• Speed: 100 fpm
• Accommodates 2.5" - 6" wide blank

This Machine is standard equipped with no tooling in the center position. There are (2) sets of extended shafts to form any of the Auxiliary Rolls shown below.

 

• Speed: 30 or 100 feet per minute.
• Motor: 5 HP 230/460/3/60/1800 RPM.
• Drive: Matched Double Vee Belt.

This machine comes standard wiith either full reeves lock or modified reeves lock tooling for the production of round duct. 

 

• Capacity: 26 gauge (full reeves); or 24 gauge (modified reeves)
• Speed: 100 feet per minute
• 10 Stations

The Quadformer machins is standard with reinforced "S" Cleat & 1 1/8" Drive Cleat rolls (20-28 Ga.) mounted inboard and 2 sets of extended shafts for auxiliary tooling. Add the optional head mounted Quad-Cutter attachment (shown)for slitting blanks for the "S" and Drive Cleats.

• Speed: Approx. 100 feet per minute.
• Motor: 5 HP 230/460/3/60/1800 RPM .
• Drive: Double Vee Belt.

Flagler offers several machines that do not have any tooling installed as standard and can be customized to meet a particular need. The type of application will dictate the proper machine to use.

 

This machine is standard equipment with no tooling in the center position. There are two (2) sets of extended shafts to form any of the 7-station or 10-station auxiliary rolls.

 

• Speed: 30 or 100 RPM
• Motor: 3 HP 230/460/3/60 /1800 RPM
• Shipping Weight: Varies

Flagler offers several machines that do not have any tooling installed as standard and can be customized to meet a particular need. The type of application will dictate the proper machine to use.

 

This machine is standard equipment with no tooling in the center position. There are two (2) sets of extended shafts to form any of the 7-station or 10-station auxiliary rolls.

 

• Speed: 30 or 100 RPM
• Motor: 3 HP 230/460/3/60 /1800 RPM
• Shipping Weight: Varies

Features Exclusive dial adjustment for instant changing for all gauges 20-30, replaceable toll bits for the Male Button Lock, and split shear roll assemblies on Male Button Lock that can be resharpened.

• Capacity: 20 to 30 Gauge
• Depth of Pocket: 1/2" Pocket
• Speed: Approx. 100 feet per minute.