4,438.00The BS-250M horizontal band saw from Baileigh Industrial is a great saw for any fabrication shops that cut a variety of material and profiles. The BS-250M is a inverter driven variable speed band saw that allows the operator to precisely adjust the speed for the proper blade and material, increasing the life of the blade and decreasing expensive blade costs. The inverter drives a 3 hp motor through a gearbox so there are no pulleys to adjust or belts to break

The BS-330M manual bandsaw from Baileigh Industrial has been a mainstay in our lineup since it was introduced in 2005. This saw will provide years of trouble free use in any environment. The BS-330M has a maximum capacity of 13” OD round, but can cut up to 13" x 18½" rectangle when stood upright. The Blade speed on the BS-330M is variable form 82 to 270 feet per minute. This allows the operator to set the speed at the perfect fpm for the material being cut. The 3 hp motor on the BS-330M is powered by 220 volt 3 phase power for more reliability and efficiency over single phase.

Baileigh Industrial Four Roll Plate Roll PR-603-4

The PR-603-4 four roll plate roll would be a great addition to any fabrication shop or sheet metal shop that has a need to roll ¼” mild steel in 6 foot lengths.

The PR-603-4 plate roll uses a planetary gearbox connected to a robust 4hp motor to drive the top and bottom rolls at a solid 16 feet per minute. For even more forming power Baileigh Industrial uses direct linear piston movement for the lateral or forming rolls. Unlike other plate rolls that use orbital movement for the lateral rolls, the direct movement feature allows the operator to form tighter diameters with less work. The PR-603-4 plate roll uses an industrial 1.5 hp hydraulic motor to move the lateral rolls.