Dust Collector

Grizzly 5 HP Cyclone Dust Collector - G0442

 

Cyclonic action separates the heavy dust particles from the fine particles and drops them into the 55-gallon steel drum. The fine dust travels past the 16" diameter impeller and is then trapped by a cartridge filter made of spun-bond polyester that filters 99.9% of particles from 0.2 to 2 microns in size. The cartridge filter is pleated to provide 226 square feet of surface area for efficient air movement and a clear plastic bag collects the fine cake that shakes off the filter for consistent dust collector performance. Casters mounted to the drum also make disposal of the larger chips and dust as easy as it gets. Other features include: a vertical motor support for reduced vibration, thick walled 11 gauge steel blower housing, 14 gauge steel cyclone body, 360 degree blower rotation for easy connection to a duct system, TEFC Class "F" motor, filter cleaning devise for optimum performance and a magnetic switch with remote control. A rugged steel stand is included.

CSA certified meeting CSA C22.2 #243-10 and ANSI/UL 1017-8 standards!

 

 

 

Grizzly 2 HP Dual-Filtration HEPA Cyclone Dust Collector - G0440HEP

 

The best of the best! This is the same unit as our G0440, but pre-equipped with the upgraded dual-filtration HEPA filter system! Our dual-filtration HEPA cyclones are geared toward those looking for the best filtration on the market. Features a primary filter with efficiency of 99.9% at 0.2-2 microns and a secondary HEPA filter with efficiency of 99.97% at 0.3 microns in size. The advantage of this dual filtration setup is the majority of all fine dust is captured by the first filter and only the finest dust makes it to the HEPA filter. This results in a superbly long-lasting HEPA filter and the ultimate in clean air quality.

 

 

 

 

 

Grizzly 3 HP Dust Collector with Aluminum Impeller - Polar Bear Series - G1030Z2P

 

This is the same machine as our G1030Z2, but with the hugely popular Polar Bear color scheme and an aluminum impeller! This 3 HP Dust Collector is designed to capture dust and wood chips from multiple woodworking machines at the same time.

 

 

 

Grizzly 1-1/2 HP Dust Collector - G1028Z2

 

This large capacity dust collector runs at 120/240 volts giving you the flexibility to run in any shop situation. A real performer! CSA certified meeting CSA C22.2 #243-M91 and UL 1017-4th standards!