Manual Band Saws

Most steel shops need a good quality band saw to do their rough length cutting, but don’t want to be limited on its capacity. That is where Baileigh Industrial’s massive BS-1100SA Semi-Automatic column band saw comes in. It is the largest in the Baileigh Industrial line of horizontal band saws. With its 43.3” solid round cutting capacity, there is almost nothing that this monster can’t cut.

Do you need to replace your current band saw because your shop has out grown it or just looking for a new one to increase production? Then look at the BS-20M-DM dual mitering bandsaw from Baileigh Industrial. The BS-20M-DM has evolved form the original BS-20M to what you see here, an easy to use dual mitering band saw. The BS-20M-DM is a dual mitering saw with capabilities to miter 45° left and 60° right with just flick of the wrist and a push or pull of the head. The BS-20M-DM band saw also incorporates a heavy duty in feed table and out feed table to help save strain on the operator.

Have a job that requires multiple angles in both left and right direction? If so the BS-350M horizontal band saw might just be the right choice for you. This dual mitering saw has a full cast iron head and bow that swivels 60 degrees right and 45 degrees left. The BS-350M has a 90 degree round capacity of 10-1/2”, making this the perfect saw for any fabrication shop.

Over the years the BS-260M dual mitering band saw has gone through a number of changes. Once again we have improved it and made it even better. Gone is the day of the DC driver board to adjust the blade speed, now the BS-260M has an AC inverter for even better control and reliability, the best part is that it still is powered by only 220V single phase so it can be used just about anywhere.

The BS-300M is the perfect bandsaw for those shops that like the look and operation of an old time American style band saw. It is the perfect cutoff saw for those shops that cut many different shapes and profiles of metal. With its 9-3/4” round capacity at 90 degrees the BS-300M can handle almost anything that you can throw at it. The BS-300M runs a heavy duty 2hp motor on 220 volt single phase power, which will allow any shop to be able to get the benefits of this great saw. The BS-300M is also variable speed allowing the operator to fine tune the saw for better cut quality.

The BS-916M horizontal band saw is based off of the BS-300M, but with a little smaller footprint for those shops that have limited space. The BS-916M is modeled after the American style saw that has been around for decades and carries over many of those saws traits. Like all Baileigh industrial bandsaws the BS-916M is built to last, with a full cast iron bed and fully welded base it can take punishment. An easy to access control panel located on top of the bow makes operation on the BS-916M a breeze. An automatic shut off feature at the end of the cut, coolant system, and a blade tension device are also included. Baileigh Industrial designed this saw to take abuse and stay working hard. The powerful 1-1/2 hp motor is powered by 220 volt single phase power and features 4 blade speeds ranging from 82 to 235 feet per minute. With its 8-3/4” round capacity at 90 degrees the BS-916M is big enough to get most jobs done.

4,438.00The BS-250M horizontal band saw from Baileigh Industrial is a great saw for any fabrication shops that cut a variety of material and profiles. The BS-250M is a inverter driven variable speed band saw that allows the operator to precisely adjust the speed for the proper blade and material, increasing the life of the blade and decreasing expensive blade costs. The inverter drives a 3 hp motor through a gearbox so there are no pulleys to adjust or belts to break

The BS-210M horizontal bandsaw from Baileigh Industrial will be a great performer in your shop and will quickly become one of your favorite tools to use. A good mix of features and benefits plus an outstanding price make this saw a winner. Since it only requires 110V to operate, it can be used anywhere, small to large machine shops or even in the garage at home. The BS-210M has a maximum capacity of 6-3/4” round at ninety degrees and has a head that can miter to 60 degrees.

The BS-712MS is one of the most versatile horizontal bandsaws on the market. The design is based off of the BS-712M, but add a heavy duty cast iron swivel head to do its mitering instead of the vise. This feature allows for faster production times and less waste. The BS-712MS horizontal bandsaw is powered by 110 volts, allowing it to be used just about anywhere. It also features wheels to make it portable.

Have limited space but need a lot of versatility out of your band saw? Take a look at the BS-712M from Baileigh Industrial, this compact band saw can be run in the traditional horizontal position for general cut offs or in a vertical position, by just lifting the bow and locking it in place, for doing precise shape cutting.

The BS-127P from Baileigh Industrial is a high quality portable band saw that will give any shop years of profitability.  The BS-127P is 110 volt so it can work in any setting and it’s driven by an inverter that allows the operator to adjust the blade speed from 75 to 246 feet per minute, to achieve the best cut possible, as well as increase blade life.