Cold Saws

Do you have a machine shop that needs to cut a lot of solid material to length before machining? If so the CS-70NC tungsten carbide saw is for you. Designed to cut solid high alloy, carbon, non-ferrous, and tool steel grade materials or heavy wall tubing accurately and efficiently, the CS-70NC will take all the abuse that a production environment can throw at it. The maximum capacity of the CS-70NC is 2-3/4” solid with an 11” carbide blade.

When you have a shop that is cutting stock to length all day, every day, it is time to look at the efficiency of the process. That is where the CS-475AV automatic cutoff saw from Baileigh industrial comes in. This fully automatic saw will save time and money over nearly any other way of cutting stock. The CS-475AV is a column style saw that has four blade speeds; 35, 60, 70, and 120. The options for the different speeds makes the CS-475AV a good saw for cutting many different types of metal. This is a 90 degree cutoff caw that has a maximum capacity of 4.92 inches.

If you have a shop that cuts a lot of aluminum, then you need a fully automatic cold saw that is made purposely for non-ferrous materials. The CS-400AV from Baileigh Industrial might just be the perfect saw. This automatic cold saw uses a 16” blade that spins at 3200 RPM, higher speeds help prolong blade life when cutting through softer metals such as aluminum or copper.

The CS-C485SA is a 16-1/2" vertical column cold saw and is a semi automatic machine that uses a Yaskawa inverter drive to control the saw blade speed up to 120 rpm's. This cold saw comes standard with an industrial grade coolant system, drive motor and hydraulic feeding system that will provide decades of profitable use to any demanding fabrication or machine shop.

The CS-C425SA is a semi-automatic column coldsaw that is perfect for any full-service fabrication or machine shop. The CS-C425SA operates on 220 volts of 3 phase power and accepts a maximum blade of 16" and uses an industrial grade gearbox, drive motor, and hydraulics. The cutting head rides up and down a heavy way track that has been hardened and ground to offer the most accurate cuts in the industry. The column has adjustable gibs that ensure long life from the slide ways. The down feed movement of the cutting head is hydraulically fed offering a precise cutting pressure through the cycle which extends blade life. The CS-C425SA is a vertical column cold saw that has been constructed to last for decades.

When cutting non-ferrous material, such as aluminum or copper, you need a high speed cut off saw to ensure a great cut every time. The CS-355SA semi-automatic high speed cut off saw from Baileigh Industrial is a great choice because of the 220 volt three phase, 5.5hp high speed motor that turns 3200 RPM, which is perfect for cutting those soft metals known for gumming up blades. The CS-355SA has a maximum capacity of 4-1/4” round at 90 degrees, and the ability to miter from 45 degrees to the right to 90 degrees on the left, this is the perfect saw for any shop.

Do you have the need for more production from your current cut off saw? The CS-350SA from Baileigh industrial might just be the right choice. It is a great production saw for any shop that is cutting thin, medium, or thick walled pipe, tubing, extrusions, or solid bar stock. Designed from the CS-350M, this design has proven itself to be one of the best production saws available. The head of the CS-350SA is made from heavy duty cast iron and has a self centering vise that is unique because it keeps the material perfectly centered with the blade for absolutely perfect cuts. The blade of the CS-350SA is direct drive and run by a 4 hp motor that requires 220 volt three phase power. The head features all metal gears that are ground and hardened for long life, and to ensure tight tolerances are kept throughout the life of the saw, the CS-350SA has a backlash adjustment. The CS-350SA has two operating speeds, 26 and 52 rpm.

Ever dream of having an extra hand to hold large awkward material when trying to close the vise on your cold saw? Well the CS-350P from Baileigh Industrial has taken care of that problem! The CS-350P is based from the CS-350M but adds a pneumatic closing vise to the equation. Tap the included foot pedal and the material is clamped and there is no need to worry if it is clamped tight enough, because the vise stays under pressure until the foot pedal is tapped again.

Do you have the need to cut a lot of non-ferrous material, such as aluminum or copper? If so then the CS-355M high speed cold saw is a great choice. The CS-355M has a 5.5hp high speed motor that turns 3200 RPM, which is perfect for cutting those soft metals known for gumming up blades.

Baileigh 4 hp 220-volt 3-phase Circular Cold Saw CS-350M



The CS-350M metal cutting saw is the best cold saw on the market for its price. It makes pristine cuts and includes features you won’t find on competing saws, like a self-centering vise and coolant system.

• Accepts a 14” blade.
• 4.25” round tube capacity at 90°.
• Miters 45° right and 90° left, perfect for slotting applications.
• 2 blade speeds: 26 and 52 rpm. Switch between them to cut a variety of materials.
• Robust 4 hp motor runs on 220-volt 3-phase power.

The CS-275SA semi-automatic cold saw form Baileigh Industrial is a great production saw for any shop that is cutting thin, medium, or thick walled pipe, tubing, extrusions, or solid bar stock. The CS-275SA has an 11” blade and its design is based off of the CS-275M. This design has proven itself to be one of the best production saws available. The CS-275SA has a maximum capacity of 2-3/4” round at 90 degrees and has the ability to miter from 45 degrees to the right to 90 degrees on the left, perfect for slotting applications.

Baileigh Industrials revolutionary new CS-350EU cold saw will change the way you think about cold saws. The CS-350EU is a unique 14” circular cold saw features a true inverter that drives the motor. This inverter allows the blade speed to be adjusted from 24 to 120 RPM. This range of RPM covers most of the cutting application that this cold saw will encounter. The CS-350EU cold saw is a powerful machine that can cut through solids, tubing, or pipe. The head has a strong motor coupled to a direct drive gear box that allows the blade to cut through the material chatter free which increases blade life. The CS-350EU cold saw has a thick cast iron base making it very rigid that is mounted on a steel base. The Baileigh Industrial CS-350EU circular cold saw can miter 45 degrees to the left and 45 degrees to the right with the ability to slot perpendicular to the material as well.