Drum Sanders

The 3760 is a serious wide belt sander for the small woodworking shop. This machine packs most of the features of our larger sanders into a lower cost machine. The 3760 is available with a 10 HP single phase or 15 HP three phase motor. This sander comes standard with a 3/4 HP conveyor motor, photo electric belt tracking, pneumatic belt tension, 2-1/2 In. removable platen, 6 In. internal dust chute and 5 emergency stops. The sanding belt size is 37 In. x 60 In.

Grizzly 37in 15 HP 3-Phase Drum Sander - G0450

 

Sand stock up to 36-1/2" wide and 4" thick with variable speed feed control and the economy of spiral-wrapped 6" wide sandpaper rolls. Built for production environments, these Drum Sanders feature industrial-quality conveyor belts and dual 6" sanding drums. Includes a 4-port dust scoop to maximize dust collection, easy access to sanding drums, emergency stop for safety, solid steel construction, independent motor control, amp load meter, and massive power with a 15 HP, three-phase motor. With the variable-speed control on the conveyor, you can dial in the perfect finish you need for each job. CSA certified meeting CSA C22.2 #105-1953 and UL 987-8 standards!

 

 

 
 

Grizzly 37in 10 HP Drum Sander - G0449

 

Sand stock up to 36-1/2" wide and 4" thick with variable speed feed control and the economy of spiral-wrapped 6" wide sandpaper rolls. Built for production environments, these Drum Sanders feature industrial-quality conveyor belts and dual 6" sanding drums. Includes a 4-port dust scoop to maximize dust collection, easy access to sanding drums, emergency stop for safety, solid steel construction, independent motor control, amp load meter, and massive power with a 10 HP, single-phase motor. With the variable-speed control on the conveyor, you can dial in the perfect finish you need for each job. CSA certified meeting CSA C22.2 #105-1953 and UL 987-8 standards!

 

 

 

On Back order

Laguna 37×2 Double Drum Sander - SUPMX-937003

 

Sand two grits in a single pass with a 37×2 Double Drum Sander. Featuring INTELLISAND Technology and a 5 HP motor, you can significantly reduce the amount of time you spend sanding.

 

The 37×2 Double Drum Sander features INTELLISAND Technology that auto-regulates the conveyor based on load, preventing burning, gouging, and damaging stock. The machine comes standard on an open-column base, and features a 5 HP motor. Available in Single and 3 Phase power.

 

Need a larger machine? Check out our 50×2 Drum Sander.

Laguna 13 Combination Brush/Drum Sander - SUPMX-91067

 

The 13 Combination Brush/Drum is the answer to your production bottleneck. Developed with mouldings in mind, this versatile sander can tackle every step in your finishing process, from sanding raw wood to sanding in between coats of stain or primer. Read about other applications below.

 

This model features a 1-3/4 HP motor, and can handle stock up to 4 thick, or as thin as 1/32. It can also be equipped with an optional sanding drum for surface sanding.

 

Laguna 25 X 2 Double Drum Sander - SUPMX-913002

 

Sand two grits in a single pass with a 25×2 Double Drum Sander. Featuring INTELLISAND Technology and a 5 HP motor, you can significantly reduce the amount of time you spend sanding.

 

The 25×2 Double Drum Sander features INTELLISAND Technology that auto-regulates the conveyor based on load, preventing burning, gouging, and damaging stock. The machine comes standard on an open-column base, and features a 5 HP motor. Available in Single and 3 Phase power.

 

Need a larger machine? Check out our 37×2 or 50×2 Drum Sanders.

Grizzly 24in 5 HP Drum Sander w/ VS - G1066Z

 

You can't beat a Drum Sander for removing planer knife marks and glue lines after panel glue ups while maintaining a consistent board thickness. These 24" Drum Sanders are the ideal size for finishing up after most planers, and the dual drums allow a coarse and fine sanding in one pass, if desired. The G1066Z features a variable-speed feed rate, and built in amp meter to gauge workload. Every shop needs one of these!