- Pexto Box and Pan Brake
Light duty bending brakes are for light forming requirements (up to 16 gauge mild steel). When used within their rated capacity, they will form a minimum 1/2" flange over their entire length.
- Maximum Rated Capacity: 16 gauge mild steel
The PX24 Box and Pan Brakes adjustable back gauge are ideal for small, precise box and pan work (up to 3" deep). It will accommodate sheet metal up to 16 gauge. The PX24 will bend as much as a 135¡ angle in up to a 24-inch length. Standard fingers provided include one each 3/4", 1", 1 1/4", 1 1/2", 3", 4 1/2", and 6". Fingers are heat-treated die steel, precision ground. Set of fingers can be arranged to form 3/4: to 24" in 1/4" increments. Back gauge adjustment is from 0-24". Adjustable friction brake lock stops upper bar dead-weight drop and permits precise positioning of upper bar to scribed line on work piece before final clamping. The pan brakes have optional special fingers to adapt them to inside mitered lip boxes, 9" long square tubes and radius bends up to 1". The floor mount stand shown must be ordered as a separate item.
Minimum 1/4" (PX24) reverse bends are possible with these light duty brakes by removing both the apron angle iron work support and apron filler plate and reducing the capacity by four gauges.
Extension Fingers (PX24 & PX36) for inside mitered lip boxes, minimum 2 1/2" square box.
Radius Fingers (PX24 & PX36) Available in widths of 3/4", 1", 1 1/4", 1 1/2", 3", 4 1/2", and 6" with radii of 1/16", 1/8", 3/16", 1/4", 5/16", 3/8", 7/16", 1/2", 3/4", and 1".
Open End Finger (PX24 & PX36) for forming square tubes up to 9" long, tapers from 3/4" to 1 1/2".
| Specifications | No. PX24 |
| Bending length | 24in./610mm |
| Capacity mild steel, 1-Inch flange bending bar and angle in place: bending bar and angle removed: |
16ga./1.60mm 20ga./1,00mm |
| Minimum reverse bend (bar and angle removed) |
1/4in./6.35mm |
| Maximum lift of beam | 1in./25mm |
| Finger Widths | IN.: 3/4, 1, 1-1/2, 1-3/4, 3, 4-1/2, and 6in. MM: 19, 25, 38, 44.5, 76, 114, and 152mm |
| Maximum depth of box | 3-inches/76mm |
| Back gauge adjustment | 0-24in. / 0-610mm |
| Shipping Weight | 270lbs./125kg |
| Radius Fingers (Optional) | IN: 1/16, 1/8, 3/16, ¼, 5/16, 3/8, 7/16, ½, ¾, and 1in. MM: 1.6, 3.17, 4.76, 6.35, 7.95, 9.5, 11, 12.7, 19, and 25.4mm |
| Bench Stand (Optional) | 34" long, 14" wide, 30" High |
| Bench Stand shipping weight | 160lbs. / 75kg |
Request a Quote Today!
This item requires additional attention to provide you with the most competitive delivered price. We welcome you to request a quote by adding the item to your cart and proceeding through the checkout steps. When prompted for payment information, simply select ‘Quote Request’ and continue on. A specialist will be notified and contact you straight away with a complete quote!
