Clausing Radial Drill 63 IN ARM - CLC1600H
Standard Features…
- Equipped with hydraulic separate clamping unit. Vertical movement of arm is coordinated by an IC timer. With a single touch on push button switch, you can have the arm unclamped then move vertically, or stop then clamp automatically. Very easy to operate, and tools will always stay at the same point after tool shifting
- Gears in gear box are cooled by oil cycled by an oil pump to minimize gear wear
- Friction type disc clutch absorbs impact force caused by vertical movement of spindle, and protects all transmission units inside gear box. With quick spindle return, the clutch will help speed-up the tapping operation
- Powerful 5 Hp, 2-speed, heavy-duty spindle drive motor
- Special arm elevating device is provided to prevent arm from falling down abruptly after years of usage
- Coolant system
- Tool kit and manuals
- 230/3/60 volt standard other voltage require special order or transformer
| Specifications and Dimensions | |||
|
Model CLC1600H
|
|||
|---|---|---|---|
| Working Area | Drill Head | ||
| Column Sleeve Dia. (E): |
12.61" (320mm)
|
Spindle Taper: |
5MT
|
| Column Face to Spindle Center | Spindle Stroke: |
10.63" (270mm)
|
|
| Maximum (D+C): |
63.00" (1600mm)
|
Quill Diameter: |
3.15" (80mm)
|
| Minimum (D): |
13.78" (350mm)
|
Number of Spindle Speeds: |
12
|
| Spindle Head Travel (C): |
49.21" (1250mm)
|
Spindle Speeds (rpm): |
56-1450
|
| Base Surface to Spindle End | Number of Steps: |
3
|
|
| Maximum (A): |
55.90" (1420mm)
|
Spindle Feed Rate (in(mm)/rev.): |
0.0023"(.06mm), 0.004"(.10mm), 0.008"(.20mm)
|
| Minimum (B): |
18.31" (465mm)
|
Spindle Drive Motor (2-speed): |
5 hp (3.8 Kw)
|
| Arm Vertical Travel (A-B): |
36.7" (932mm)
|
Elevating Motor: |
2 hp (.75 Kw)
|
| Arm Rotation (Right & Left): |
180°
|
Coolant Pump Motor: |
1/8 hp (.10 Kw)
|
| Baseplate Working Surface: |
70.9" x 40.4"(1800 x 1026mm)
|
||
| Box Table Area | Capacities | ||
| Length (L): |
24.8" (630mm)
|
Drilling In Steel: |
1.97" (50mm)
|
| Width (K): |
19.7" (500mm)
|
Drilling In Cast Iron: |
2.36" (60mm)
|
| Height (H): |
19.7" (500mm)
|
Tapping In Steel: |
1.57" (40mm)
|
| Base Dimensions | Tapping In Cast Iron |
1.97" (50mm)
|
|
| Floor Area (R x S): |
100.4" x 38.2"(2550 x 970mm)
|
Boring In Steel: |
4.33" (110mm)
|
| Height (Q): |
7.9" (200mm)
|
Boring In Cast Iron: |
6.55" (165mm)
|
| Dimensions/Weights | |||
| Max. Machine Height (F): |
108.7" (2760mm)
|
||
| Base and Column Height (G): |
86.1" (2186mm)
|
||
| Shipping Dimensions (L x W x H): |
105.2" (2670mm) x
44.1" (1120mm) x 94.9" (2410mm)
|
||
| Net Weight: |
7,275 lbs. (3300kg)
|
||
| Shipping Weight: |
8,378 lbs. (2800kg)
|
||
